Sticker Operator
Essential Functions
- Monitoring the sticker flow into slings and strapping up full bundles.
|
- Also keeping belts and chains running freely.
|
- Monitor the flow of stickers into slings and lockout and lower bundle down to chain and place two straps around it in the middle.
|
- Monitor and keep the sticker magazines full at the wet board stacker
|
- Monitor the chipper and its conveyors for plug ups or the metal detector needing reset.
|
- Pick out bad and broken sticks that are to short or split and slide down the chute in the sticker box below.
|
- Operate the wet board stacker console on the east side of wet board stacker when possible to help Breakdown operator stay caught up.
|
- Keep walkways and catwalks clean of any debris.
|
Bander/ End Wax
Essential Functions |
- Keep lathe placer in full and in operational condition.
|
- Verify Grade and length for correctness.
|
- Spray End Wax.
|
- Paint stencil when needed.
|
- Change rolls of banding.
|
- Utilize slack time by cleaning area.
|
- Keep work area neat, orderly, and clean.
|
- Clean bander tracks and heads pre-shift, do PMs
|
- Keep battens filled for product being run.
|
- Break off lathe pieces sticking out from units.
|
- Fix unit on Strapper re-entry and run through Strapper.
|
- Return miss graded boards to the P.E.T. tree.
- Perform the PM for the machine
|
Stacker II
Essential Functions
- Complete daily PM inspection of all machinery in area prior to use. Notify supervisor, and/or maintenance of any issues that cannot be corrected.
|
|
- Operator must bend and twist to fix cross ups on chain and at the hoist.
|
|
- Maintain proper sticker placement in unit being stacked and refill cartridges when needed.
|
|
- Be able to work overtime when needed and come in early to do operator PMs for Stacker.
|
|
- Transfer completed units to bander.
|
|
- Complete down time report daily.
|
|
- Housekeeping – keep work area and walkways clear of obstacles, debris, and lumber.
|
|
- Know how to trouble shoot bander and repair as needed and within a reasonable skill level.
|
|
- .Monitor loads as they are transferred from the outfeed hoist through the bander, paint booth, and load doubler.
|
|
- Change banding as needed.
|
|